 |
Services
Line for lenghtwise cutting - CRM90 - Italy
The line can process CR and hot dip galvanized coils with a thickness from 0.2 mm to 2.0 mm to a precise cold cut strips with width from 10 mm to 1500 mm.
The line was bought from "Cipriani profilati" - Rovereto, Italy
Situated in BASE 2 - Metal Service center
Weight of coil - up to 10 Mt
Width of coil - up to 1500 mm
Inner diameter of the coil - from 500mm to 870 mm
Thickness - from 0.2 mm to 2.0 mm
Size or the strips : width from 10 mm to 1500 mm
Guillotine shears
Line for crosswise cutting of Cold rolled, Galvanized and Hot rolled coils with a thickness 0,3 to 3,0 mm on a sheet with a size given from the client.
Situated in a warehouse BASE 1 (circle road, bifurcation Kasichene)
Possibility to finish and cutting HR coils from 1.5 mm to 2.0 mm
Weight of coil - up to 10 Mt
Width of coil - up to 1250 mm
Inner diameter of coil - from 500mm to 870 mm
Thickness - from 0.4 mm to 2.0 mm
Size of the sheet: lenght from 800 mm to 3000 mm
Fully automated line for lenghtwise cutting of cold rolled and hot rolled coils with thickness form 0,5mm up to 4mm for precise strips from 20mm up to 1550mm.
It's a brand new line, purchased in 2008
Situated in BASE 2 – Metal Service Centre
Weight of coil – up to 20 Mt
Width of coil – up to 1550mm
Size of the sheet: lenght from 500 up to 10 000mm
Fully automated line for crosswise cutting and straightening of cold rolled and galvanised steel from coils to sheets with thickness from 0,2mm up to 2,0mm.
It's a new line, installed and put in exploitation in March 2007, made in Italy
Weight of coil – up to 15 Mt
Width of coil – up to 1250mm
Size of the sheet: lenght from 100mm up to 6000mm
Three fully automated lines for non-stop production of steel dry wall profiles UD; CD; UW; CW.
New lines, installed and put in exploitation in 2006 and 2007.
Made in Italy, with production capacity of 2 500 000 l.m. per month.
Situated in BASE 2 – Metal Service Centre
The profiles, produced for export and for domestic market, are DIN 18182-89 certified.
Production centre for reinforcing steel ready workpieces
It is new centre, put in exploitation in October 2007, situated on the territory of BASE 2.
The centre is separated in a production facility, equiped with seven automated production lines made in Germany (STEMA – PEDAX) with high production capacity and high quality of the ready product.
|
| |
DIN 1028 ST 37, ST 37-1, ST 37-2
|
|
